Searchโ€ฆ
Static Build
This guide follows the same setup as our Pi-Node guide and image so you may need to adjust sections based on your node's environment and setup.

Current Official Cardano Node Version: 1.30.1

Overview ๐Ÿ—’

    Download Cardano Node Static build & configuration file
    Extract the file's content
    Check if you already have Cardano Node service running
      Safely shutdown your Cardano node if it is running
    Replace the old binaries with the new cardano-node and cardano-cli
    Check cardano-node and cli version is updated to the current version
    Replace old configuration files with new ones (if needed)
    Restart your Cardano Node
    Check that node has started properly

Download the cardano-node & cli

Static binaries and Cardano node configuration files are provided by [ZW3RK] pool๐Ÿ™ and can be found at our Github repository.

1
wget https://github.com/armada-alliance/cardano-node-binaries/raw/main/static-binaries/1_30_1.zip
Copied!
Extract the content from the zip file.
1
unzip 1_30_1.zip
Copied!

Check if cardano-node is running already

Now we need to make sure we do not have a cardano-node already running. If we do we must shut it down before proceeding.
You can check if you have a cardano-node process already running a few ways like usinghtop or by checking your systemd service.
If you have been following our Pi-Node guide you can check your cardano-node status and stop it using the following commands.
1
cardano-service status
2
cardano-service stop
Copied!
If you use Linux's htop service just check for a processing running starting with cardano-node run and use SIGINT to terminate the process.

Replace the old binaries and config files with the new ones

If you are using the Pi-Node guide and your cardano-node & cli in ~/.local/bin
1
mv cardano-node/* ~/.local/bin
Copied!

Check your cardano-node version

1
cardano-node --version
Copied!

Output:

1
cardano-node 1.30.1 - linux-aarch64 - ghc-8.10
2
git rev 0000000000000000000000000000000000000000
Copied!

Check your cardano-cli version

1
cardano-cli --version
Copied!

Output:

1
cardano-cli 1.30.1 - linux-aarch64 - ghc-8.10
2
git rev 0000000000000000000000000000000000000000
Copied!

Download & Replace the Cardano node configuration files

Mainnet
Testnet
Alonzo-Purple
1
cd ~/pi-pool/files
2
wget https://hydra.iohk.io/build/7370192/download/1/mainnet-config.json
3
wget https://hydra.iohk.io/build/7370192/download/1/mainnet-byron-genesis.json
4
wget https://hydra.iohk.io/build/7370192/download/1/mainnet-shelley-genesis.json
5
wget https://hydra.iohk.io/build/7370192/download/1/mainnet-alonzo-genesis.json
6
wget https://hydra.iohk.io/build/7370192/download/1/mainnet-topology.json
Copied!
1
cd ~/pi-pool/files
2
wget https://hydra.iohk.io/build/7370192/download/1/testnet-config.json
3
wget https://hydra.iohk.io/build/7370192/download/1/testnet-byron-genesis.json
4
wget https://hydra.iohk.io/build/7370192/download/1/testnet-shelley-genesis.json
5
wget https://hydra.iohk.io/build/7370192/download/1/testnet-alonzo-genesis.json
6
wget https://hydra.iohk.io/build/7370192/download/1/testnet-topology.json
Copied!
1
cd ~/pi-pool/files
2
wget https://hydra.iohk.io/build/7370192/download/1/alonzo-purple-config.json
3
wget https://hydra.iohk.io/build/7370192/download/1/alonzo-purple-byron-genesis.json
4
wget https://hydra.iohk.io/build/7370192/download/1/alonzo-purple-shelley-genesis.json
5
wget https://hydra.iohk.io/build/7370192/download/1/alonzo-purple-alonzo-genesis.json
6
wget https://hydra.iohk.io/build/7370192/download/1/alonzo-purple-topology.json
Copied!

Restart the Cardano Node

Now we just need to restart our cardano-node service if you are using our Pi-Node guide use this command
1
cardano-service start
Copied!
Wait a few seconds or so then check the status
1
cardano-service status
Copied!
Last modified 5d ago